5052 aluminium alloy for AL-Mg alloy aluminum, is the most widely used as a rust-proof aluminum, high strength of this alloy, especially with anti-fatigue strength Fu: plasticity and high corrosion resistance, heat treatment can enhance the half when the plastic is still good work hardening, work hardening at low plasticity, good corrosion resistance, good weldability,…
5005 aluminium alloy is an aluminium alloy with good resistance to atmospheric corrosion. It is used in decorative and architectural applications. It is a member of the 5000 series of aluminum-magnesium wrought alloys. As such, it is not used in casting. It can attain moderate to high strength by cold working, and has relatively high…
3004 aluminium alloy is an alloy in the wrought aluminium-manganese family (3000 or 3xxx series). It is similar to the 3003 alloy, except for the addition of approximately 1% magnesium. It can be cold worked (but not, unlike some other types of aluminium alloys, heat treated) to produce tempers with a higher strength but a…
Aluminium alloy 3003 is a medium strength alloy with excellent resistance to atmospheric corrosion and offers very good weldability as well as good cold formability. It has a much higher elongation and tensile strength, especially at elevated temperatures when comparing it to the 1000 series alloys. Typically, Alloy 3003 is used in a number of…
2014 aluminium alloy is an aluminium-based alloy often used in the aerospace industry. It is easily machined in certain tempers, and among the strongest available aluminium alloys, as well as having high hardness. However, it is difficult to weld, as it is subject to cracking. 2014 is the second most popular of the 2000-series aluminum…
Physical Properties Metric English Comments Density 2.82 g/cc 0.102 lb/in³ AA; Typical Component Elements Properties Metric English Comments Aluminum, Al 91.7 – 94.2 % 91.7 – 94.2 % As remainder Copper, Cu 5.5 – 6.5 % 5.5 – 6.5 % Iron, Fe <= 0.20 % <= 0.20 % Magnesium, Mg <= 0.50 % <= 0.50 % Manganese,…
1100 aluminium alloy is an aluminium-based alloy in the “commercially pure” wrought family (1000 or 1xxx series). With a minimum of 99.0% aluminum, it is the most heavily alloyed of the 1000 series. It is also the mechanically strongest alloy in the series, and is the only 1000-series alloy commonly used in rivets. At the…
1070 aluminum is a 1000-series aluminum alloy: it is considered commercially pure, and is formulated for primary forming into wrought products. 1070 is the Aluminum Association (AA) designation for this material. In European standards, it will be given as EN AW-1070. Additionally, the EN chemical designation is Al99,7. And the UNS number is A91070. It…
1060 aluminium alloy is an aluminium-based alloy in the “commercially pure” wrought family (1000 or 1xxx series). It is fundamentally very similar to 1050 aluminium alloy, with the difference coming down to 0.1% aluminium by weight. However, while both 1050 and 1060 are covered by the same ISO standard, they are covered by different ASTM…
1050 aluminium alloy is an aluminium-based alloy in the “commercially pure” wrought family (1000 or 1xxx series). As a wrought alloy, it is not used in castings. Instead, it is usually formed by extrusion or rolling. It is commonly used in the electrical and chemical industries, on account of having high electrical conductivity, corrosion resistance,…
