5052 aluminium alloy for AL-Mg alloy aluminum, is the most widely used as a rust-proof aluminum, high strength of this alloy, especially with anti-fatigue strength Fu: plasticity and high corrosion resistance, heat treatment can enhance the half when the plastic is still good work hardening, work hardening at low plasticity, good corrosion resistance, good weldability, machinability bad, can be polished.

5052 aluminium alloy exhibits higher corrosion resistance than other aluminum alloys and higher strength than 3003 aluminum plate. In addition, it exhibits good salt water resistance, making it a popular material for marine applications. 5052 aluminum is easy to form, stamp, weld and finish. It has fair machinability with the proper setup.

5052 aluminum plate

Spot Sizes

5052 aluminum plate Thickness 0.15mm-50mm, width: 100mm-2000mm, length: 1000mm-9000mm,

Aluminum plate Physical Properties

Alloy Temper Thickness
Tensile Strength
Rm/Mpa Min.
Yield Strength
Rp0.2/Mpa Min.
% Min.
5052 O / H111 6-12.5 170-215 65 19
>12.5 170-215 65 18
H112 6-12.5 190 80 7
12.5-40 170 70 10
>40 170 70 14

Chemical Composition % Max.

Alloy Si Fe Cu Mn Mg Cr Ni Zn Ti Zr Other Al
Each Total
5052 0.25 0.40 0.10 0.10 2.2
0.15 0.05 0.15 Remainder

5052 aluminium alloye Typical Applications

5052 aluminium alloy is used for products that require high strength in corrosive environments, also commonly used in transport vehicles, vessels, sheet metal parts, instruments, lights bracket and rivets, metal products, electrical appliances, such as Shell. Can also be used in the manufacture of aircraft fuel tanks, fuel lines, aerospace aluminum alloy material, is typical of the anti-rust alloy material.

Leave a comment

Your email address will not be published. Required fields are marked *