There are many models of aluminum sheet on the market, and different models have different differences. You must carefully distinguish them when choosing, otherwise it is easy to buy the wrong one. So what is the difference between 5052 vs 6061?

5052 vs 6061

There are the following 6 differences between 5052 vs 6061:

1: The alloying elements are different.

In terms of alloying elements, the 5052 aluminum alloy element is magnesium, and the 6061 aluminum alloy element is magnesium and silicon.

2: The tempers of 6061 vs 5052 is different.

In terms of tempers, 5052 aluminum as three tempers of H112, H24, and H32, while 6061 aluminum has only two states of T6 and T651.

3: The performance is different.

From the point of view of performance, 5052 aluminum sheet has better performance, has the characteristics of fatigue resistance, corrosion resistance, good welding performance, good plasticity, and can be polished, but it also has certain shortcomings, such as: no heat treatment strengthening, low plasticity during cold work hardening, poor machinability and so on. The 6061 aluminum sheet has the characteristics of corrosion resistance, weldability, and good oxidation effect, so it is best for you to buy according to your needs when purchasing, so that you can buy satisfactory products.

4: The scope of application is different.

From the point of view of the scope of application, 5052 aluminum plate is an anti-rust aluminum alloy, so it is generally used in environments with relatively high anti-rust requirements. The 6061 aluminum sheet is generally used in places with relatively high strength requirements, so from this point of view, there are still many differences between the two.

5: The tensile strength is different.

From the perspective of tensile strength, the tensile strength of 5052 aluminum is less than or equal to 225 MPa, and the elongation is greater than or equal to 10%. The tensile strength of 6061 aluminum is greater than or equal to 180MPa, the yield strength is greater than or equal to 110MPa, and the elongation is greater than or equal to 14%.

6: Market prices of 5052 vs 6061 are different.

From the price point of view, the price of 6061 aluminum sheet is more expensive than 5052 aluminum sheet, but the performance and application of the two are different, so when you choose aluminum plate, it is best to decide according to your own needs.

Leave a comment

Your email address will not be published. Required fields are marked *