5052 aluminum alloy is used for parts requiring good formability and corrosion resistance with high fatigue limit, good weldability and medium static load, such as aircraft fuel and oil conduits, fuel tanks, as well as various parts of marine and land cloud equipment, cold stamping parts, sheet metal products, street lamp pillars; materials used as…
Aluminum 1100 pure aluminum. It is soft and ductile with excellent workability. Ideal for applications involving intricate forming because it work-hardens more slowly than other alloys. It has the highest thermal conductivity of any aluminum alloy and its electrical conductivity is second only to the electrical conductor grade. 1100 aluminum alloy is one of the…
According to the content of alloying elements, aluminum sheets can be divided into 8 series: 1000, 2000, 3000, 4000, 5000, 6000, 7000, 8000. 1 x x x series aluminium alloy sheets: representing 1050, 1060, 1100 alloy. Among all the series, the 1000 series belongs to the series with the highest aluminium content. The purity can…
Hardness comparison of aluminium alloy: Tensile strength of 1060 aluminium alloy is 110-130, while that of 5052 series is 210-230, that is to say, the hardness of 5052 aluminium alloy is 100% higher than that of 1060 alloy . Elongation: The elongation of 1060 aluminium series is 5%, while the elongation of 5052 series is…
6061 aluminum alloy is a precipitation hardening alloy, containing magnesium and silicon as its major alloying elements.Strength, skid resistance as well as durability are the primary selling points of the 6061 t6 aluminum sheet. Although 6061 t6 aluminum sheet is not as flashy as 3003 aluminum sheet, it is commonly used for industrial applications including…
8006 aluminium alloy is a wrought alloy. It possesses good corrosion resistance and high strength. Chemical Composition The following table shows the chemical composition of 8006 aluminium alloy. Element Content (%) Aluminum, Al 95.9 – 98.5 Iron, Fe 1.2 – 2 Silicon, Si ≤ 0.40 Copper, Cu ≤ 0.30 Manganese, Mn 0.30 – 1…
8011 aluminium alloy is a wrought alloy.and it is otherwise unclassified series. Due to 8011 aluminum alloy contains Al-Fe-Si and other chemical elements, 8011 aluminium plate has a lot of alloy advantages. 8011 Aluminum Specification The following data table shows the typical chemical component of 8011 aluminium alloy. And the key specifications of our 8011 aluminum…
5052 aluminium alloy for AL-Mg alloy aluminum, is the most widely used as a rust-proof aluminum, high strength of this alloy, especially with anti-fatigue strength Fu: plasticity and high corrosion resistance, heat treatment can enhance the half when the plastic is still good work hardening, work hardening at low plasticity, good corrosion resistance, good weldability,…
5005 aluminium alloy is an aluminium alloy with good resistance to atmospheric corrosion. It is used in decorative and architectural applications. It is a member of the 5000 series of aluminum-magnesium wrought alloys. As such, it is not used in casting. It can attain moderate to high strength by cold working, and has relatively high…
3004 aluminium alloy is an alloy in the wrought aluminium-manganese family (3000 or 3xxx series). It is similar to the 3003 alloy, except for the addition of approximately 1% magnesium. It can be cold worked (but not, unlike some other types of aluminium alloys, heat treated) to produce tempers with a higher strength but a…
