3105 H14 aluminium plate refers to an aluminum plate or sheet with the temper of H14. In the aluminum plate model, two or three Arabic numerals after H indicate the subdivision status of H. H1—refers to the state of simple work hardening treatment, and is suitable for a state in which the required strength is obtained only by work hardening without additional heat treatment.

H in H24 indicates a state of work hardening, and some use T instead of H to indicate a heat treatment state. 24 denotes a processing technique for controlling physical properties such as hardness, and in addition to 24, there are also 12, 14, 16, 18, 22, 26, 34, 36, etc., and generally 4 ends in a semi-hard state. The 1060O state, 1060-H22, 1060-H24, and 1060-H18 are soft to hard arrangements.

3105 h14 aluminium plate price

  3105 h14 aluminium plate chemical composition:

Aluminum Al: balance

Silicon Si: 0.5

Copper Cu : 0.05–0.2

Zinc Zn: 0.10

Manganese Mn: 1.0–1.8

Iron Fe: 0.6

Single: 0.05

Mechanical properties of 3105 h14 aluminum plate:

Tensile strength (MPa) ) 120-160

Conditional yield strength 0.2 (MPa) ) ≥ 85

Sample size: all wall thickness

Note: Longitudinal mechanical properties of pipe at room temperature

The 3105 h14 aluminium plate price varies with content of impurities and particles in the plate. Assume that the impurity content is 0.1 and the particle size 300, and the price is much lower than a plate with 0.1% impurities yet only 0.1 particle size. Thus if you want a specific aluminium plate price, you are advised to contact a supplier directly.

Leave a comment

Your email address will not be published. Required fields are marked *